-
SubscriptionSubscription
We will irregular release Chroma solutions, technics, exhibitions, seminar and webinar news. Subscribe today to get more information.
-
0Inquiry Cart
Chroma Power Electronics Test Solutions not only apply in the industries of Information Technology, Communication, Aerospace and National Defense, but also in energy efficient products such as Hybrid Automobiles, LED luminance devices, solar and fuel cells that are developed aggressively under the pressure of natural resource constraints.
Chroma has a wide variety of instrumentation including AC Power Sources, DC Power Supplies, DC Electronic Loads, AC Electronic Loads, Digital Power Meters, and Automatic Test Systems that are ideal for power input/output terminal tests and dynamic simulation.
The systems can be used to test PC/Servo/Telecom power supplies, adapters, chargers, backlight inverters, LED power drivers, UPS's, PV Inverters, and EV chargers. With technical support groups available worldwide, Chroma can provide automated test systems and the fabrication of test fixtures simultaneously at multiple locations across the globe.
Quick Menu
AC Power Source
Regenerative Grid Simulator
Model 61809/61812/61815
- Output power rating: 9kVA~15kVA
- Output voltage: 0~350V
- High Power Density 15kVA in 3UH
- Intuitive Touch Panel Interface
High Performance Programmable AC Power Source
Model 61500 Series
- Output power rating: 500VA~90kVA
- Output frequency: 15Hz~2kHz (5kHz Option)
- PLD simulation and harmonics, inter-harmonics waveform function
- Capability of testing IEC 61000-4 series standards
Programmable AC Power Source
Model 61600 Series
- Output power rating: 500VA~90kVA
- Output frequency: 15Hz~2kHz
- Capable of delivering high CF current
- Turn on, turn off phase angle control
3-Phase AC Power Source
Model 61700 Series
- Output Power Rating: 1.5kVA~12kVA
- Three Phase Output Voltage 0~300V
- Output Frequency: 15Hz~1.2kHz
- Capable of Power Line Distortion simulation
Regenerative Grid Simulator
Model 61830/61845/61860/61800-100/61800-100(800VLN)
- Output power rating: 30kVA~60kVA max. 300kVA (Parallel connect up to 5 units)
- Three phase output voltage 0~300V/30Hz~100Hz
- Full 4-quadrant with regenerative capability
- Capable of Power Line Distortion simulation
DC Power Supply
Programmable DC Power Supply
Model 62000E Series
- Single output models, max. output rating: 5kW, 1200V, 22.5A
- 3-CHs output models, max. output rating: 1.7kW, 600V, 7.5A
- Fixed-range+ / Auto-range output models
- Multiple remote control
Bidirectional DC Power Supply
Model 62000D Series
- 2 in 1 Bidirectional DC Power Supply + Regenerative Load
- Rating: Voltage 0-1800V, Current up to 540A, Power up to 540kW
- PV, Battery, Fuel Cell simulation
DC Power Supply
Model 62000H Series
- The latest 100V wide range of models (applicable to 40V/50V/60V/80V/100V models)
- 5kW/10kW/15kW/up to 1000V
- Easy Master/Slave Parallel & Series Operation up to 150kW
- Graphical User Interface - Softpanel
Solar Array Simulator
Model 62000H-S Series
- High-voltage 1800V for string PV inverter test solution
- 5kW/10kW/15kW/18kW up to 1MW
- Fast Transient Response Solar Array Simulation
- Build-in dynamic MPPT test profile of EN50530/Sandia/CGC-GF004/CGC/GF035/NB-T32004
Ultra-High Stability DC Power Supply
Model 62075H-30N
- 7.5kW/up to 60V
- Current Stability: 2.5mA/10ppm
- High Resolution Current Programming & Measurement: 20-bit DAC & 24-bit ADC
- Ethernet/LXI Interface
- Magnet power supply application
DC Power Supply
Model 62000L Series
- Power range: 108W/150W
- Low noise: <3mVp-p
- High transient response time: <30us
- Steps for auto sequencing programming
Modular DC Power Supply
Model 62000B
- 1.5kW Per Module up to 120kW System
- N+1 Redundancy
- Hot Swappable
- Burn-in and plating application
DC Power Supply
Model 62000P
- Power Range: 600W / 1200W / 2400W / 5000W
- Wide Range of Voltage & Current Combinations with Constant Power
- Auto Sequencing Programming: 10 Programs / 100 Sequences / 8 bit TTL
- Graphical User Interface - SoftPanel
DC Electronic Load
High Power DC Electronic Load
Model 63200A Series
- Rated power: 2kW, 3kW, 4kW, 5kW, 6kW, 12kW, 18kW, 24kW, Max. 240kW (Parallel)
- Voltage Range: 0-150V, 0-600V, 0-1200V
- User Defined Waveform (UDW)
- Sync. Dynamic Control
High Power DC Electronic Load (Economical)
Model 63200E Series
- Rated power: 2kW, 3kW, 4kW, 5kW, 6kW, 8kW, 10kW, 12kW, 15kW, 18kW, 20kW, 24kW
- Voltage range: 0-150V, 0-600V, 0-1200V
- Timing/discharging measurement for batteries
DC Electronic Load
Model 63000 Series
- Rated power：250W、350W
- Voltage Range：150V
- CC, CR, CV & CP operation modes
- Full protection: OC (adjustable), OT, OP (adjustable) protection & OV warning, polarity reverse alarm
LED Load Simulator
Model 63110A/63113A/63115A
- Power rating: 100W×2(Dual), 300W
- For LED power driver test
- Simulate LED I-V curve
- Fast response for PWM dimming test (63110A only)
DC Electronic Load
Model 6310A Series
- Power rating: 200W, 100W×2(Dual), 30W & 250W, 300W, 350W, 600W, 1200W
- Wide range 0~600V operating voltage
- Up to 8 channels in one mainframe
- Dynamic loading with speeds up to 20kHz
High Speed DC Electronic Load
Model 6330A Series
- Power rating: 200W, 100W×2(Dual), 30W&250W, 300W, 350W, 600W, 1200W
- Improve operating speeds of load for auto test system integration
- Synchronous paralleling control
- Synchronous dynamic loading up to 7000W
DC Electronic Load
Model 63600 Series
- Power rating: 100W×2(Dual), 300W, 400W
- Sweep function for dynamic loading from 50Hz to 10kHz
- User Defined Waveform function
- CZ mode for turn on capacitive load simulation
AC Electronic Load
AC and DC Electronic Load
Model 63800 Series
- Power rating: 1800W, 3600W, 4500W
- Parallel/3-Phase function (AC mode only)
- Constant & Rectified load modes for AC loading
- CC, CR, CV, CP for DC loading
Regenerative AC Load
Regenerative AC Electronic Load
Model 63800R Series
- Rated power: 9kVA, 12kVA, 15kVA
- Voltage range: 30Vrms~350Vrms
- Accept reverse rated apparent power with 89% efficiency regenerative conversion to grid
- Suitable for EVSE, Off-Grid PV inverter, and UPS product test applications
Regenerative AC Load Function
Model 61800 Series
- 61800 series optional function
- Operating voltage: 50~300VLN
- Operating frequency: 30~100Hz
- Support CC rectified mode, CP rectified mode, CR mode, CC phase lead/lag mode and CP phase lead/lag mode
Regenerative DC Load
Regenerative DC Electronic Load
Model 63700 Series
- Rated power: 6kW, 12kW, 18kW
- Voltage range: 600V, 1,200V, 1,800V
- Energy recovery efficiency: Up to 93%
- Intelligent fan control
Digital Power Meter
Digital Power Meter
Model 66205
- Provides 0.05% FS measurement accuracy
- Single phase measurement application
- Voltage range: 15Vrms~600Vrms (6 Range)
- Current range: 5mArms~30Arms (10 Range)
- Meets Energy Star、IEC 62301 requirement
Digital Power Meter
Model 66203/66204
- Provides 0.1% FS measurement accuracy
- Three phase measurement application
- Voltage range: 15Vrms~600Vrms (6 Range)
- Current range: 5mArms~20Arms (8 Range)
- Wiring mode: 1P2W, 1P3W, 3P3W, 3V3A, 3P4W
Automatic Test System (ATS)
Switching Power Supply ATS
Model 8000
- Open architecture software platform
- Capable of coding for any power supply testing applications
- High test throughput by system default test items
- Microsoft word based evaluation report or UUT characterization
Switching Power Supply ATS (SMPS ATS)
Model 8200
- Comprehensive hardware modules provide high accuracy repetitive and measurements
- Cost effective
LED Power Driver ATS
Model 8491
- Capable to test Multi-UUT/Multi-output concurrently that improve productivity
- Optimized standard test items for LED Power Driver to deliver excellent test performance
Battery Simulator
Battery Simulator SoftPanel
Model A170202
- Multi-channel battery packs simulation.
- Follow the battery cell curve behavior to simulate battery state.
- Able to set frequently used parameters for battery pack and rapidly customize initial output state.
Graphical User Interface - SoftPanelTM
Graphical User Interface - SoftPanelTM
Model 62000E
- Control of 30 channels at once, up to 10 Chroma 62000E devices
- Controlled via standard USB & Ethernet and optional GPIB interfaces
- Report functions support 1~10,000s sampling rate and up to 10,000h59m59s recording time
- LIST Mode supports 100 levels of voltage/current settings with 10ms~15,000s dwell time
- STEP Mode quickly composes one-directional voltage rise or drop tests
Graphical User Interface - SoftPanel
Model 62000D
- Performs LV123 and LV148 automotive standards tests
- Controlled via GPIB, USB, and Ethernet interfaces
- Supports report functions with sampling rates from 1 to 10,000 seconds, and a record time of up to 1,000 hours, 59 minutes, and 59 seconds
- List mode supports 100 levels of voltage settings, and each one can set individual slew rate for voltage, current, and dwell time (ranging from 5ms to 15,000s)
- Supports battery simulator and fuel cell simulator
Graphical User Interface - SoftPanel Regenerative AC Load Function
Model 61800
- AC Load function
- CC Rectified mode, CP Rectified mode, CC Phase Lead/Lag mode, CP Phase Lead/Lag mode, and CR mode
- Provides 100 sets of Auto Run changes
- Supports report function
Graphical User Interface - SoftPanel
Model 61500
- LIST, STEP, PULSE modes simulate power for interference testing
- Voltage transient simulation (conform LVRT testing)
- Harmonics and inter-harmonics waveform synthesizer
- Parameter testing include current harmonic components of each order
- Supports GPIB/RS-232C/USB/Ethernet communication interfaces
Graphical User Interface - SoftPanel
Model 61600
- Single-phase/three-phase modes
- Simulates three-phase unbalance
- Provides Auto Run for long-term repetitive testing
- Supports report function
- Supports GPIB/RS-232C/USB/Ethernet communication interfaces
Graphical User Interface - SoftPanel
Model 61800
- LIST, STEP and PULSE modes to simulate power line disturbance (PLD) for testing
- Transient voltage simulation for power outage (compliant with low voltage ride through (LVRT) test)
- Distortion waveform synthesis for harmonic and inter-harmonic
- Measuring parameters include all orders of harmonic components
Graphical User Interface - SoftPanel
Model 62000P&H Series
- NEW LV148Standard for Complete Vehicle Testing
- Supports ISO16750-2, GS95024-2, VW80000, LV123 standards
- Control via GPIB/USB/Ethernet/RS232 interface
- Supports report function with sampling rate from 1 second to 10000 seconds, and up to a maximum of 1000 hours 59 minutes and 59 seconds
Graphical User Interface -SoftPanel
Model 63200A
- User-defined waveform and auto sweep function
- Battery discharging and sine wave loading for battery tests
- High-speed and accurate measurements
- Program function supports 100 sets of changes
- Supports GPIB/USB/Ethernet/CAN communication interfaces
Graphical User Interface - SoftPanel
Model 66200
- Intuitive display of test results and preview of voltage/current waveforms
- Harmonic measurement (66205 meets IEC 61000-4-7 regulations)
- Parameter testing includes various current harmonic components
- Supports report function
- Supports GPIB/USB/RS-232C(66205)/Ethernet(66205) communication interfaces
SoftPanel for Aviation
Avionic Standards for MIL-STD-704F
- Incorporates MIL-STD-704F avionic regulations
- Displays test item content
- Supports editing of the test sequence
- Supports GPIB/RS-232C/USB/Ethernet communication interfaces
SoftPanel for Commercial Aviation
Avionic Standards for RTCA DO-160G
- Incorporates RTCA DO-160G avionic regulations
- Displays test item content
- Supports editing of the test sequence
- Supports GPIB/RS-232C/USB/Ethernet communication interfaces
SoftPanel for Airbus A350
Avionic Standards for ABD0100.1.8.1
- Incorporates ABD0100.1.8.1 avionic regulations
- Displays test item content
- Supports editing of the test sequence
- Supports GPIB/RS-232C/USB/Ethernet communication interfaces
Battery Simulator SoftPanel
Model A170202
- Multi-channel battery packs simulation.
- Follow the battery cell curve behavior to simulate battery state.
- Able to set frequently used parameters for battery pack and rapidly customize initial output state.
- ↑