eDP Signal Pattern Generator Card Model 27010P-04+A270152

eDPSignalPatternGeneratorCard
eDPSignalPatternGeneratorCard
eDPSignalPatternGeneratorCard
Key Features
  • VDD offers OCP, OVP, UCP, UVP protection mechanisms
  • VBL offers OCP, OVP, UCP, UVP protection mechanisms
  • Communicate with PC through a RS-485 cable
  • Burn-in (aging test) log can record the V/I measurement values and machine status of the burning-process in detail
  • Signal complies to the eDP 1.4 specifications and standards
  • Supports 1, 2, 4 lane eDP output
  • eDP supports the v1.4 defined 7 types of lane rate (1.62Gbps / 2.16Gbps / 2.43Gbps / 2.7Gbps / 3.24Gbps / 4.32Gbps / 5.4Gbps)
  • Supports manual/automatic Training modes
  • Supports Pre-emphasis settings (0dB / 3.5dB / 6dB / 9.5dB)
  • Configurable to 6, 8, 10 bits
  • VDD provides over voltage/current protection
  • Supports 2 sets of independent AUX and HPD channels
  • Output design is provided with ESD protection devices

27010P-04 is a signal module and is primarily used for burn-in aging tests. 27010P-04 can be used with a PC through a RS-485 cable and offers a Panel for operating burn-in. 

A270152 is a eDP 5.4G signal module board and complies with the eDP 1.4 signal specifications and standards. A270152 is used with the main unit 27010P-04 and can be applied to high-order eDP burn-in testing, providing eDP Panel standard signals and other related control.

Operation Guideline

  • STEP 1  Connect the Signal/VDD/VBL cable.
  • STEP 2  Connect one end of the RS-485 cable to the main unit PC, connect the other end to the hub (A270107).
  • STEP 3  Connect the DC power (16V). Then turn the POWER ON.

Product Inquiry

Select the models you wish to get a quote and click the button "Add to Inquiry Cart" below the table.
You may select multiple items at once. Click the inquiry cart icon on the right hand side of webpage to complete your inquiry.

All specifications are subject to change without notice.
Selection
Model
Description

eDP Signal Pattern Generator Card